Our high-quality former noses are produced on our modern 5-axis simultaneous CNC production machines. All former noses are made of special steel in order to extend the service life of the product.
Depending on the type or the customer’s request, the former noses are hardened and / or coated.
Our experienced team will be happy to advise you!
You may place your order quickly and easily here:
http://shop.ipb-baier.com/login.php
We produce fixed and movable jaw blades for all common folding devices.
We use a durable and wear-resistant polyurethane coating.
Your main advantage of using our jaw blades is a special hot melt manufacturing process to attach the polyurethane to the steel body. We name this coating IPpure. In addition, we can provide our fixed or movable jaw blades with a tungsten carbide spray coating (tungsten carbide coating).
When manufacturing our jaw blades, we ensure that the exact tolerance range (thickness and height) is met precisely.
All jaw blades with IPpure (polyurethane coating) or tungsten carbide coating are also repaired cost-effectively and within the shortest delivery times.
You may place your order quickly and easily here:
http://shop.ipb-baier.com/login.php
Our ink knives with micro laser slots 0.025 mm wide enable:
We offer slitters for longitudinal cutting of paper webs, foils, cardboard, etc.
Our slitters are professionally hardened from chrome steel, HSS, ASP (powder metallurgical steel) or hard metal and ground on our production machines.
On request, we can manufacture any outside diameter from 20-300 mm with the corresponding inside diameter, thickness, chamfers, grooves and bore holes.
Our anvils can be made of chrome steel, HSS, powder metallurgical steel or carbide.
All anvils are professionally hardened and ground on our grinding machines.
Your advantages are greatly reduced downtimes and an increase in productivity.
Perforators for endless perforation made of chrome steel, hardened and precision ground.
Any desired tooth pitch with a gap of 1 mm or bigger can be produced on request. Any outside diameter up to 200 mm can be supplied with grooves, bore holes and in various thicknesses.
Our standard tucking blades with or without bevels are available for all common folding devices. Different recesses, cutouts and holes are possible.
All tucking blades can be supplied with a single bevel or with a double bevel.
Special tucking blades for the 3rd and 4th fold in folders are available with coatings.
Cutting sticks are an important wear part for the entire cutting system. The right selection of cutting sticks can significantly increase production, reduce downtimes and extend the life of the knives.
Our cutting sticks are offered in different qualities and hardnesses depending on the intended use. Possible qualities:
Not sure which quality is right for you? We are happy to help.
Our cheek woods are made from an elastic plastic foam for use in knife bars. All common standard profiles are available from stock at short notice. Hardness: approx. 0.35-0.60 g / ccm.
Knife boxes with elastic pressure strips can be manufactured completely ready for installation for all types of folders.
Sheet guides are made of different materials such as plastic (s-green, PA or POM), steel, aluminum, polyurethane or teflon, depending on the intended use and wear requirements.
Our company offers foam pads for all common web offset machines.
To optimize the usage properties, our foam pads are made from the following material combinations:
Foam pads for longer periods of use are also manufactured with wear protection made of polyurethane with approx. 90 Shore.
Folder pins are used for gripping and forwarding the cut print copy.
We have folder pins for almost all popular folders in stock.
Custom-made products can be produced at short notice according to a sample or drawing in appropriate quantities.
We offer grippers and the associated gripper pads for all folders in web offset printing. Depending on the type of gripper, these are made of spring steel or high-alloy tool steel.
Gripper pads are made from tool steel and coated with a tungsten carbide or polyurethane coating as required.
Tension rollers for transporting the paper webs in the folders and paper guides.
We offer tension rollers in the following designs:
Used tension rollers with a steel core or creasing anvils can be reprocessed cost-effectively.
Our former plates are manufactured on modern machine tools to enable production within the narrowest tolerance range.
All former plates are made of alloy steel and are hard chrome-plated in order to achieve longer service lives.
Our most popular creasing anvils are made of tool steel or aluminum, coated with polyurethane and ground to size.
Used tension rollers with a steel core or creasing anvils can be reprocessed cost-effectively.
Cutting and transport rollers are made from tool steel and are used for lateral trimming of paper webs.
We also manufacture cutting rollers with a tungsten carbide coating or a polyurethane coating.
Bearer Pads can be supplied in all different dimensions.
In standard dimensions, with bore holes, slots or recesses they can sometimes be delivered from stock at short notice.
Our wash up blades for web offset printing machines are made of steel bodies with a rubber lip and are used to remove old paint when changing colors.