• ++43 (0) 3862 56 279-0
  • office@ipb-baier.com

Web Offset

Web Offset

Former Nose

Former Nose

High Quality former noses are manufactured on our 5-axis simultanous CNC milling machines.
We have 20 years of experience in the production of our former noses.

All noses are made of special steel to extend the service life of the product.
Depending on the type or customer’s request, the former noses are hardened and / or coated.
Our experienced team will be happy to advise you!


Jaw blades

Jaw Blades

Our company produces different kind of folder jaw for all common folders.
We use a long lasting  and wear resistant polyurethane coating. Your main advantage, when using our Folder jaws is, that have developed a special hot melting production procedure to fix the polyurethane to the steel body.  We Name this coating IPpure.

We are also able to provide our fixed or movable jaws  with sprayed tungsten carbide Coating (Wolfram Carbide coating)
During the production of jaw blades, we always focus our attention on keeping the strict tolerances regarding thickness and height.
All jaw blades with IPpure or sprayed tungsten carbide coating can be repaired cheaply and within shortest delivery times.


Ink Tucking Blade

Ink Tucking Blade

Our ink blades with micro laser slots of 0,025 mm provide you many advantages as for example:

  • maculature diminishes
  • life cycle of ink blade raises

Kreismesser
Slitters

Slitters

Slitters for longitudinal cutting of paper web, foil, packaging etc.

Our slitters are made of chromium alloyed steel, HSS, ASP (powder metallurgical steel) or tungsten carbide.

Every required outside diameter of 20-300 mm – with the corresponded inside diameter, thickness, chamfer, keyway and bores – can be provided. Hollow feather blades are also available with longer chamfer.


Anvil
Anvils

Anvils

Our anvils can be made of chromium alloyed steel, HSS, powder metallurgical steel or tungsten carbide. All our anvils are expertly hardened and produced on our grinding machines of highest progression. Your advantages are the drastically reduced down times and an increasing of productivity.


Perforierkreismesser
Perforators

Perforators

Perforators for continuous perforation are made of chromium alloyed steel, tempered and precisely ground. Every desired tooth pitch with gaps up to 1 mm can be manufactured.
All required outside diameters up to 200 mm with keyway, bores and different thicknesses can be provided.


Tucking Blades
Tucking Blades

Tucking Blades

Tucker blades in standard designs with or without chamfers for all common folders can be supplied. Different gaps, slots and bores are possible. All Tucker blades can be provided with single or double chamfer. Special Tucker Blades for the 3rd and 4th fold in folders can be supplied with coatings.


Cutting Sticks

Cutting Sticks

Cutting sticks are a very important component in the overall cutting systems of paper trimming machines. It has been proved; that the suitable choose of cutting sticks can improve knife life.
We offer cutting sticks in different qualities and hardness:

Possibility qualities:
rubber approx. 85° shore
polyurethane 75-85-92° shore


Pressure Bars
Pressure Bars

Pressure Bars

Our pressure bars (knife cheeks) are made of highly elastic foam material for the use in cutter bars. All common standard profiles are available from stock.
Hardness: approx. 0,35-0,60 g/ccm.


Knife boxes for web offset machines
Knife Boxes
Knife Boxes

Knife Boxes

Knife boxes with compressible foam plastic pressure bars can be manufactured for any type of folders. According to both compressible pressure bars there are no cut-outs for pins needed, as the pin screws penetrate into the elastic bars, leaving only very small holes.


Sheet Guides
Sheet Guides

Sheet Guides

Sheet Guides can-depending on the use and the demands on the wear – be made of different materials like plastics (S-green, PA or POM), steel, aluminum, polyurethane or teflon.gefertigt.


Foam Pads
Foam Pads

Foam Pads

Our company offers foam pads for sheet control for all common web offset printing and gravure machines. To optimize the characteristics of the pads, we produce our foam pads in the following combination of materials:

cell vulcollan 0,35-0,60 g/ccm on polyurethane approx. 90 Shore
cell vulcollan 0,35-0,60 g/ccm on steel approx. 0,5 mm

To extend life time of the product we produce foam pads with wear protection made of polyurethane of approx. 90 shore.


folder pin
Folder Pins
Folder pin
Folder pin

Folder Pins

Pins for picking up and transport of the cut product. We have pins for all common folders in stock. Special designs can be produced within short delivery time from samples or drawings in reasonable relations.


Gripper
Gripper

Gripper

Gripper and the appropriate gripper pads for all folders in rotogravure and offset printing. According to the type of gripper they were made of spring steel or highly alloyed tool steel.


Gripper Pads
Gripper Pads

Gripper Pads

Gripper pads are made of special tool steel and can be coated with WC or polyurethane coating if required.


Tension Roller and nip roller
Roller with polyurethane coating
Tension Roller and nip roller

Tension Roller and nip roller

Tension roller for paper web transport in folders and paper guides.
We offer tension rollers in different designs like:
-tension roller made of polyurethane 85° or 93° shore
-tension roller with steel core and polyurethane coating


Former Plate
Former Plate

Former Plate

Our former plates are made on modern cnc machines that´s why we can ensure a precise production with a very tight range of tolerance.
All former plates are manufactured from highly alloyed tool steel. Special chrome plating guarantees a longer life cycle.


Creasing anvil
Creasing Anvils
Creasing Anvils

Creasing Anvils

Creasing anvils are made of steel or aluminum, reserved with polyurethane and on dimension grinded. Used tension rollers with steel core or creasing anvils can be conditioned cheaply.


Cutting Roller
Cutting Roller

Cutting Roller

Cutting rollers and transport rollers are made of tool steel and used for lateral cutting of paper web.
We produce cutting rollers with WC-coating or polyurethane coating.


Bearer Pads

Bearer Pads

Bearer Pads can be supplied in all different dimensions.
We use exclusively acid proof raw materials to guarantee the best possible quality and function of our pads. Bearer pads in standard dimensions, with bores, slots or recesses can be delivered in short time from our stock. Special models can be dispatched from an economic quantity upwards.


Wash up Blade

Wash up Blade

Our wash up blades for offset printing machines are made of steel-bodies with rubber lip on choice for scrape off the old color when a new one is needed.